Can I use 20W50 instead of 5w30?

Can I use 20W50 instead of 5w30?

20w50 is actually thicker than 5w30. This will result in less fuel efficiency, less horsepower, and more engine damage because it will have to work harder to rotate. Trust the engineers that made your vehicle.

What is the difference between 10w 40 and 20W-50?

The smaller number, (the 20 part of 20w-50) describes how the oil behaves at 40 deg C and a 20w at 40 deg C is about 10 times thicker than your engine wants. A 10w-40 is better at around 6 times thicker and a 0w-40 is much better at about 4 times thicker.

Will 20W50 oil harm my engine?

A 20W/50 oil is much thinner at high temperature than a 5W/30 at a low temperature, so the viscosity will not hurt your engine. BUT and it is a big but! Most 20W/50 oils do not meet the anti wear requirements of modern engines!

Is 5w20 the same as 20W50?

The second value ’20’ is the operating viscosity requirements. If you use a 20w50 the operating viscosity will be much too thick. You would be better off finding a straight SAE 20 rather then a 20w50 if the car calls for a 5w20. You really need to use the required Viscosity.

Is 20W50 good for high mileage?

The viscosity level of engine oil 20W50 is geared toward racing engines, as opposed to high-mileage engines, that run extremely hot and need heavy load operation. The thickness is not meant for daily, older vehicle use.

When should I use 20W50?

20W50 motor oil is suitable for warmer climates, where the higher temperature causes the oil to thin. It is also useful for vehicles subject to hot temperatures and for those used for high-stress activities such as hauling or pulling trailers.

Which is better 15W50 or 20W50?

At colder temperatures, like in a resting engine, the flow rate is bound to be lesser. Interchangeably. Since the number on the cold start temperature is lower in your question, 15W50 motor oil would be faster to start up your ride, as compared to 20W50.

What oil is thicker 10W40 or 20W50?

10W40 is not better than 20W50 for high mileage. The difference between 10w40 and 20w50 is simply that the latter is thicker.

Will 20W50 increase oil pressure?

Yep. Step up to a 20w50 completely if needed. You can also substitute a quart or two in extreme cases for some Lucas oil stabilizer. That stuff is extremely thick and will help bump up the pressure.

Which is better 20W40 or 20W50?

20W50 will hold on to the viscosity marginally better than 20W40 when the engine gets hot. However, 20W50 mineral oil will cause more sludge than a similar 20W40 because 20W50 will have more viscosity improvers. Pulsar 150’s manual recommends 20W40, but you can use either, not much of a difference.

Which oil is thicker 20W 40 or 20W-50?

As 20W50 is actually heavier oil than 20W40.

Can I use 20W50 instead of 15W40?

20W-50 motor oil is for vehicles with gasoline engines. 15W-40 oil is for diesel applications. The difference between the two grades are just the specifications and for all practical purposes, in older vehicles without variable valve timing, the two grades of oil are interchangeable.

What is 10W-50 oil used for?

Our engine oil of the SAE classification 10W50 is a high-performance special oil for 4-stroke motorcycles of leading European and Japanese manufacturers. Synthetic base oil components in combination with successfully tested additives guarantee high performance.

Which oil is better 10W50 or 20W50?

The higher the number, the more viscous the oil will be. This is because of the fact that at higher temperatures, the oil may breakdown or loose its viscosity. 20W50 v/s 10W50- The former will be more viscous than the latter in colder regions while they will almost same properties at higher temperatures.

Which is better 10W30 or 20W50?

Designations on the label — such as 10W30 or 20W50 — tell the oil’s viscosity. In the owner’s manual, car manufacturers recommend oils for the brand new vehicle, and 10W30 is commonly used in new engines instead of heavier oils. So, 10W30 oil has less viscosity (flows easier) when cold and hot than does 20W50.

What is the difference between 10W-40 and 10W-50 engine oil?

The 10W40 has a viscosity index of 160, and the 10W50 has a viscosity index of 167 – meaning, the 10W50 has less variation in viscosity over the temperature range. The 10W40 has a higher flash point of 250ºC than the 10W50 (232ºC) – so it will withstand higher temperature than the 10W50.

Can you mix 10W-40 and 10W 50?

There is absolutely no harm in mixing different grades of engine oil! This means that any branded engine oil will mix with the standard test oil in any proportions and the mixture will still perform as specified. …

Which oil is better 10w30 or 10W40?

The difference between 10W-30 and a 10W-40 is the high temperature viscosity. Obviously, a 10W-40 is thicker than a 10W-30 at high temperature. Using the correct viscosity oil eases starting, reduces friction, and slows wear.

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top