How do I fix code P0051?
What repairs can fix the P0051 code?
- Replacing bank 2 sensor 1.
- Fixing the connection issues and reattaching the connectors.
- Repairing any open or shorted wiring.
- Replacing the heater circuit fuse.
- Replacing the ECM.
Where is the O2 sensor heater circuit located?
Bank 1 Sensor 2 is the oxygen (O2) sensor that’s in the middle of the catalytic converter or right behind the front catalytic converter (the converter that’s closest to the engine). Bank 1 Sensor 1 is the sensor between the engine and the catalytic converter.
What does heater control circuit low mean?
Diagnostic Trouble Code (DTC) P0037 stands for “Heated Oxygen Sensor (HO2S) Heater Control Circuit Low (Bank 1, Sensor 2).” It refers to a malfunction in the heating element of the downstream oxygen sensor behind the catalytic converter.
How do you fix ho2s heater control circuit low?
If the battery feed is intact, remove the ground (control) circuit from the ECM wiring connector and check for resistance on the circuit. If there is infinite resistance, repair the open in the circuit. If the control circuit checks out, suspect a bad O2 sensor. Replace and re-check.
What is a ho2s heater control circuit bank 1 sensor 2?
The Bank 1, Sensor 2 refers to Bank 1’s second sensor on the back. The PCM will then use the information to monitor the catalytic converter’s efficiency. Heater element plays a very important component for its function. For the engine to run properly, the exhaust must have the specified air/fuel ratio of 14.7 to 1.
What does code P0037?
The P0037 code is set when the ECM detects that the HO2S2 on bank 1 has a malfunctioning heater element. The heater in the oxygen sensor helps get the sensor up to operating temperature faster in order to improve fuel economy and emissions.
Can you drive with code P0101?
How serious is the P0101 code? The P0101 code will not prevent the car from driving but it is advisable to check it out as soon as possible. Sustained driving can cause internal problems in the engine.