How do you find the gear ratio on a Jeep Grand Cherokee?

How do you find the gear ratio on a Jeep Grand Cherokee?

So an easy way to determine your actual gear ratio is to check the tag attached to the differential cover by the cover bolts. On the tag there should be some numbering such as 3.54 or 3.73, either of those numbers will give you the stock axle ratio.

How do I know what rear differential I have?

Without an ID tag, differentials are identified by the number of cover bolts, the distinctive shape of the cover, the number of ring gear bolts, and ring gear diameter. They can also be identified by whether the center section is an integral or dropout design.

What rear end is 1999 Jeep Grand Cherokee?

ZJ Grand Cherokee Forum > 1999 grand cherokee. which rear end? If you have the 4.7L V8, you will have the D44a rear axle.

How can I tell what rear end my Jeep has?

Look at the inscription of the plug to find out the style of the rear end. In this example, Rich has a “Dana” style rear end. To determine if it is a 35 or 44 Dana, look at the web area to the right of the plug to locate the number.

How do I find the axle ratio on my VIN number?

How to Find Out the Gear Ratio With the VIN Number

  1. Find the VIN of your vehicle.
  2. Identify the VDS section, the fourth through eighth digits of the VIN.
  3. Find a guide online, such as Edmunds.com or Decode This, or contact an automobile dealer to help interpret the VDS.

How do I find the axle ratio on my Ram 1500?

Start the truck and put it into neutral. Rotate the rear tire 2 times and count the number of times the drive shaft turns. Close to 4 times = 3.92. Close to 3 1/2 = 3.55 Close to 3 = 3.21.

How do I find out what gear ratio my RAM is?

Rotate the tire while counting the number of teeth in the large ring gear. Do the same for the small pinion gear in the front of the ring gear. Divide the smaller number into the larger number. This is the gear ratio.

How do I know what gear ratio my RAM is?

You can always look at the tag on the differential. It has the ratio printed on it. You can also get your build sheet which is specific to your truck and lists all components used to build your truck. Simply plug your Vin number into that link.

What gear ratio does my Ram 1500 have?

Ram has a standard axle ratio of 3.21 on 2X4 trucks and 3.55 on 4X4 trucks and trucks with the diesel engine. However buyers can choose different axle ratios for their Ram 1500, including a 3.92 axle ratio.

Which Ram 1500 tows the most?

5.7L HEMI® V8 with eTorque This option provides you with the max RAM 1500 towing capacity available.

What axle is in the 2020 Ram 1500?

Axles. All all-new 2020 Ram 1500 models have a rear axle ratio of 3.21, except for the Rebel which has a 3.92 rear axle ratio.

What does axle lock do on a Ram 1500?

This vehicle is equipped with electronically locking front and rear differentials. These differentials, when engaged, mechanically lock together the axle shafts forcing the wheels to spin at an equal rate. This allows the vehicle to maintain its momentum and prevents it from becoming stuck.

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top