How do you fix a TV with no picture and no sound?
TV screen is black and there’s no sound Unplug the TV from the wall, and, if possible, remove the power cord from the back of the TV to perform a soft reset. Wait 30 seconds, and plug the TV back into a working outlet to test it again.
Why is there no picture on my RCA TV?
1 Answer. sweetpeat23 could be a power supply issue, a T-con board issue as well as a main board or panel issue. You will have to do some preliminary checks. Turn the TV on and make sure that you have an audio.
How do I reset my RCA TV without picture?
You need to unplug it and hold down the power button while it is unplugged. Do that for about a minute then leave it unplugged for another few (5-10) minutes. Then plug it back in.
Is there a reset button on an RCA TV?
@badmomma there really is no reset. You need to unplug it and hold down the power button while it is unplugged. Do that for about a minute then leave it unplugged for another few (5-10) minutes.
What do you do if your TV screen is black?
Tips You Can Try to Fix A Black or Blank TV Screen
- Switch off your TV and then unplug it.
- After 15-30 minutes, plug the TV back in then press and hold the power button for a few seconds.
- Next, release the button and turn on the TV again.
How do I reset my RCA 4k TV?
You can try to access to RCA service menu. Press the INPUT button on the remote. Then press the 2, 5, 8, 0 buttons in quick succession. Find reset and press ok.
Is there a reset button on a TV?
Simultaneously press and hold down the Power and volume Down (-) buttons on the TV (not on the remote), and then (while holding the buttons down) plug the AC power cord back in. Continue to hold the buttons down until Erasing screen appears. The TV will reboot (turn on and off).
Can a TV be fixed if there is no picture?
If there is still no picture, then the cable is damaged and needs to be replaced. Visit your nearest TV repair expert and buy a new cable.
How do you reboot the TV?
Power Reset The TV will turn off and restart automatically after about one minute. Unplug the AC power cord (mains lead). If the problem persists after step 1, unplug the TV power cord (mains lead) from the electrical outlet. Then press the power button on the TV, and release it.
How do I reboot my Smart TV?
How to restart (reset) an Android TV™/Google TV™?
- Point the remote control to the illumination LED or status LED and press and hold the POWER button of the remote control for about 5 seconds, or until a message Power off appears.
- The TV should restart automatically.
- TV reset operation is complete.
Does unplugging TV reset it?
Disconnecting the TV from the power supply does not reset the TV, it just turns it off as if it were turned off and switched on via the remote control. If you want to perform a factory reset, you can usually do so via the configuration menu or a button located somewhere on the TV.
Do flat screen TVs have a reset button?
Most TVs don’t have a reset button. There is usually a place in the menu to reset the settings to the factory defaults but that won’t help you turn the TV on.
What can cause a TV not to turn on?
If a power issue hasn’t occurred, it’s possible that the batteries in the remote control are weak or that something is interfering with the infrared (IR) signal to the TV….The TV will not turn on or does not have any power.
- A drop in voltage in electrical power.
- Power fluctuations, such as brownouts or blackouts.
- A storm.