What are oil grades?

What are oil grades?

These are SAE 0W, 5W, 10W, 15W, 20W and 25W motor oils. Their viscosity grade is low, meaning they are particularly fluid lubricants. Each category is defined by its viscosity at a given temperature (from -10°C to -35°C, depending on the grade).

What is the best engine oil brand?

  1. Editor’s Pick: Castrol GTX Motor Oil.
  2. Valvoline Daily Protection Motor Oil.
  3. Quaker State Advanced Durability Motor Oil.
  4. AmazonBasics Motor Oil.
  5. Havoline Motor Oil.
  6. Pennzoil Motor Oil.
  7. Lucas Oil Hot Rod & Classic Motor Oil.
  8. Formula Shell Motor Oil.

What is the difference between 5w30 and 5W40?

5w30 is engine oil that has lower viscosity 5 and higher viscosity 30. 5w40 is engine oil that indicates the weight and viscosity of the engine. Its lower viscosity is 5 and higher viscosity is 40. 5w30 has lower viscosity hence it is suitable to use in hot or lower temperatures.

What happens if I use 5w40 instead of 5w30?

The viscosity rate between the 5W30 and 5W40 is the same at 5 grade. The difference happens in the operating temperatures ’30’ and the ’40’ grade. 5W40 has an efficient and higher viscosity than 5W30, which helps start the engine during the summer temperature and helps thoughtfully running a car.

Can you switch from 5w30 to 5w40?

Yes, but its always better to use manufacturer recommended oil grade. A manufacturer can deny warranty claimes because of wrong grade oil. The 5w40 is slightly thicker at operating temperature but pretty much the same thickness when cold.

Is it OK to mix 5w30 with 5w40?

Mixing different oils will not improve the performance or efficiency of the engine in any way. You can use 1 litre of 5W30 mixed with 5W40 and it will not cause any sort of ill effects to the engine.

Can you mix different oils in a car engine?

Can You Mix Different Brands of Engine Oil? All API (American Petroleum Institute) oils are required to be compatible. Adding a Synthetic to a Mineral oil will give you a synthetic blend, which is better than the mineral, but does not have all the benefits of the Synthetic.

Is mixing engine oils bad?

In its mildest form, mixing different lubricants may lead to a degradation of lubricant performance. Mixing the same API grades of synthetic passenger car motor oil and mineral oil-based engine oil won’t damage the engine, but you will lose the performance features you expect from the synthetic.

Is it OK to mix different engine oils?

What happens when you mix different oil brands? While it is not recommended to mix various brands of motor oil (such as Valvoline, Castrol, Total or Mobil 1), it will not cause any damage to your engine. What is far more important is to stick with the same oil viscosity as recommended by the car manufacturer.

Will 0W20 hurt a 5W20 engine?

Sure, 0W20 will flow better than 5W20 at low temperatures, but the difference is minimal and both versions run thin in cold conditions. However, if you live in an extremely cold region, the 0W oil will do less damage than the 5W oil while starting the engine.

What happens if you put the wrong oil in the car?

You might notice a few oil spot in your garage or under your car because using the wrong oil can lead to leaks, or you might become aware of a burning smell while driving. If the oil isn’t working as it should engine parts might not be lubricated well enough and cause friction, which can burn the oil.

Is mixing 5w30 with 10W30 bad?

Pouring in 10W30 to an engine that has been running 5W30 is safe and poses no harm. However, you should know that 10W30 has more density than 5W30. The viscosity of these two oils is very close; hence, they might mix perfectly inside the engine; so to say, it is okay to mix 5W30 with 10W30.

What happens if you put 10w30 instead of 5w30?

Most oils will mix perfectly, provided they have a similar synthetic. Therefore, there is no problem in mixing 10w30 and 5w30 since one will be topping up. Mixing the viscosity of oils will not have any effect on the engine. 5w30 and 10w30 engine oils have close viscosity, and thus there is no harm in mixing them.

Is it OK to put 10w40 in a 5w30?

The recommended oil viscosity for your vehicle, according to Kia documentation, is 10W-40. If you drive the vehicle in exceptionally cold weather, well below 32 degrees, you can use 5W-30 oil but even 10W-40 is still perfectly OK to use if outdoor temperatures are below freezing.

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top