What happens when spark plug gap is too small?
The Spark-Plug Gap If the gap is too small, the spark will likely be too weak and cause the engine to run poorly or with poor efficiency. A spark-plug gap gauge both measures and adjusts the gap and is inexpensive and simple to use.
Why does spark plug gap increase?
Lack of proper ignition system maintenance can cause problems that ultimately lead to backfires. For example, a spark plug gap may widen after the plug has been in operation for months and make it difficult for the spark to jump. Also, carbon buildup may isolate the electrodes, preventing proper combustion.
Can spark plug gaps increase over time?
What Causes Spark Plugs To Wear Out? Every time a spark plug creates an arc of electricity, it very minimally shortens the electrodes. Over time, the gap between the electrodes grows larger. As this gap increases, more electricity is needed to spark ignition of the air/fuel mixture.
Does spark plug gap open over time?
The larger the gap, the harder the ignition components need to work to get the spark to jump it. It also should be noted that your gap increases as the spark plug is used — the constant arcing wears away at the metal of both electrodes, opening the gap up over time.
Can you use a dime to gap a spark plug?
Using Household Items There are two common household objects you can use to gap your spark plug — but you’re going to need to get a little creative. Those two objects are a penny and a dime, and their measurements are as follows: Penny: 0.06” Dime: 0.053”
How do I gap a spark plug without a gapper?
- A useful tool that you could use for the gapping of your spark plug is the wire-type gap gauge which can be substituted by a feeler gauge. This will do the trick of measuring the gap on the spark plug.
- Spark plug gauge gap tool might also do the trick.
Do I have to Gap ACDelco spark plugs?
Never attempt to gap an ACDelco Professional Iridium Spark Plug. You could damage the spark plug.
How do you gap a spark plug with a coin?
Most measuring tools will also feature a flat edge typically used for bending the bottom electrode on the spark plug to adjust the gap slightly. A coin-style gap measure is usually the cheapest option, and works by running the edge of the “coin” through the gap until you reach a point where it stops.