Uncategorized

When trying to fully define a sketch you can use dimensions or what Fusion 360?

When trying to fully define a sketch you can use dimensions or what Fusion 360?

When you are applying your constraints and dimensions, your final goal is to fully define the sketch. This means that the sketch is completely fixed. Fusion 360 indicates this by turning sketch geometry from blue to black.

Why are my lines Blue in Fusion 360?

Blue lines mean that the sketch object is not fully constrained and dimensioned also sometimes referred to as not fully defined. So when you start sketching a circle and it snaps to the sketch origin, it will be constrained to that sketch origin, but will still be blue. When you then dimension it it will turn black.

What is a joint limit in Fusion 360?

Joint Limits are values that define the range of motion allowed for components that move or rotate in an assembly in Fusion 360. You can use joint limits to evaluate a design by limiting motion to known maximum, minimum, and resting values.

What is the Snap option in the sketch palette used for?

Slice will lop off the top of the body so you can see your sketch. “3D Sketch” will allow you to create sketch lines and splines that have points off the sketch plane, by snapping to body vertexes, work points, etc. yes, grid snapping is lower priority than alignment.

When using the marking menu in a sketch what position is the sketch sub menu located?

At the top is a radial menu called a marking menu.

  • We will focus on the marking menu and ways to use it to speed up access to common commands.
  • After right mouse clicking you can move your cursor and a wedge will highlight different parts.

What makes a construction plane useful in the creation of a sketch?

Utilize construction planes to help you build your Fusion 360 designs in all three dimensions. The tool allows one to make two-dimensional CAD drawings and extend them into the third dimension by adding what Autodesk calls “features” to your drawings.

What is the first step to starting a sketch Fusion 360?

Getting Started with Fusion 360: Start with an empty design

  1. A new empty design is created and opened.
  2. Specify -10 mm for the height in the dialog or by dragging the manipulator arrow.
  3. The body should look similar to this, depending on the values you used.
  4. Use sketches to create bodies.
  5. Select the same XZ plane you used for the box earlier.

What options are available when using extend surface?

Use the following options to set what happens when you select Surfaces > Extend. Tangent adds new isoparms to the extended surface. Extrapolate rebuilds the surface according to the direction and distance specified, but without adding new isoparms. Sets the length of extension.

How do I change the size of the rectangle in Fusion 360?

Edit your sketch, then click the Sketch drop down menu and click Sketch Dimension, then click on the dimension line you want to edit, move the mouse to show the dimension and click again to fix it to the sketch. You can now change the dimension to what you want.

How do you make a hollow box in Autocad?

To create a hollow solid:

  1. Click Solid tab > Feature panel > Hollow to display the Hollow Solid dialog:
  2. Use the dialog to remove a face of a solid and offset it to create a hollow solid.
  3. Move the cursor over a solid.
  4. Click the face of the solid you want to remove to highlight it.

How do you hollow out an object in Inventor?

If you want to hollow a 3D object you can do so with the shell feature. Click on “Shell” and the vase you created with the rotation feature to hollow it. Select the top face of the vase to create an opening and set thickness to 3mm.

How do you cut a solid in Autocad?

Slice a 3D Solid or Surface With a Cutting Plane

  1. Click Home tab Solid Editing panel Slice. Find.
  2. Select the 3D solid or surface objects to slice. Press Enter.
  3. Specify two points to define the cutting plane.
  4. Specify which side of the sliced object to retain, or enter b (Both) to retain both sides.

How do you draw a cylinder in Autocad?

Create a Solid Cylinder With an Elliptical Base

  1. Click Home tab Modeling panel Cylinder. Find.
  2. At the Command prompt, enter e (Elliptical).
  3. Specify the start point of the first axis.
  4. Specify the endpoint of the first axis.
  5. Specify the endpoint (length and rotation) of the second axis.
  6. Specify the height of the cylinder.

How do you make a tube in Inventor?

Create tube and pipe runs

  1. With an assembly file open, click Environments tab Begin panel Tube and Pipe .
  2. In the Model browser or graphics window, right-click the blank area and select Create Pipe Run.
  3. Do either of the following:
  4. Click OK to close the dialog box.

How do you draw a 3D sketch in Inventor?

Create 3D sketch

  1. On the ribbon, click 3D Model tab Sketch panel Create 3D Sketch .
  2. If necessary, right-click the origin work planes, axes, and origin center point in the browser to turn on visibility.
  3. If necessary, use Include Geometry to copy geometry from 2D sketches to the 3D sketch.

How do you make a 3D line in Inventor?

Create 3D Lines The 3D Line tool lines in 3D space, with or without bends between segments. In an active 3D sketch, click 3D Sketch tab Draw panel Line . Right-click and do one of the following: Select Auto-Bend to automatically place 3D arcs at corners of 3D lines.

Category: Uncategorized

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top